Save 21%

Fiberlock Penewet Wetting Agent & Surfactant, Clear, 5 Gallon Pail, FLK6450-5 / 6450-5
FLK6450-5

List price: $105.00
$82.99
+
You save: $22.01 (21%)
Fiberlock Penewet Surfactant is a ready-to-use, colorless wetting agent/surfactant solution incorporating advanced concepts in surface chemistry. It provides superior wetting, penetrating and coalescing of Asbestos Containing Material (ACM) to permit handling and removal of these materials under damp, dust-free conditions. Penewet is a non-flammable, water based liquid that will not corrode aluminum components of spray equipment.

Features

  • Ready to use formula
  • Satisfies NESHAP requirements
  • Penetrates and “wets out” asbestos to help create a damp, dust-free environment

Specifications

  • Coverage:  Smooth Surfaces 500 sq. ft. (46 sq. m) per gallon , Porous Surfaces 300 sq. ft. (46 sq. m) per gallon
  • Colour:  Clear
  • Odour:  Odourless
  • Shelf Life:  36 Months Min. (Original Sealed Container)
  • pH:  7.5 to 8.5
  • Flash Point:  Non-combustible 
  • Viscosity at 70°F:  50-55 Kreb Units
  • Surface Tension:  31 dynes/cm
  • Average Particle Size:  0.2 microns
  • Package Size:  5 Gallon Pail
  • Ready to use: Yes
  • Product Number: 6450-5

Product Application

Surface Preparation: Carefully clean up with a wet mop or HEPA vacuum. Stir Penewet thoroughly to achieve a uniform consistency. Penewet is pre-mixed, water addition is not necessary.

Apply Penewet initially at full strength. Wait a few minutes after the first application and re-spray to ensure adequate penetration and saturation of ACM. After determining the proper rate of spray that is effective for the removal of the ACM, and documenting acceptable fiber count levels. Air monitoring results will determine the suitability of this procedure.

Application Tool:  Apply Penewet with an airless or pump sprayer.

Cleanup:  Tools and drippings should be cleaned with warm soapy water. Follow equipment manufacturer’s directions to clean spray equipment. Dispose of all waste according to current Local, Provincial and Federal regulations.

Brand:
Fiberlock
Coverage Area:
300 - 500 sq. ft.
Package Size:
5 Gallon
pH:
7.5
Ready To Use:
  • Yes

Product Data Sheet (PENEWET-6450-PDS.pdf, 546 Kb) [Download]

SDS (Safety Data Sheet) (Penewet-6450-5-SDS.pdf, 115 Kb) [Download]

Label (6450-5.pdf, 150 Kb) [Download]

No posts found

Write a review