Coverage
- Smooth Surface: >500 ft2/gallon
- Porous Surfaces: 350 - 500 ft/gallon
Surface Preparation
Warning! If you scrape, sand, or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum.
Application Tools
Apply Fiberset PM with airless spray equipment. Use the settings below when applying Fiberset PM: Spray: .015-.021 tip @ 1700-3000 P.S.I
Product Application
Stir Fiberset PM thoroughly to achieve a uniform consistency. Fiberset PM is pre-mixed; water-addition is not necessary
LOCKDOWN - Sealing microscopic residual fibers after asbestos removal is mandatory on every project. Prior to post-removal air monitoring, apply one coat to all exposed surfaces. Fiberset PM has been accepted as part of a UL Classified Fireproofing System for use with Retro-Guard® manufactured by W.R. Grace. Coverage should not be less than 500 sq. ft. per gallon on smooth surfaces.
Fiberlock Fiberset 7475 PM Asbestos Lockdown, CLEAR, 5 gallon pail
No posts found