IAQ 6000 mold resistant coating was developed to withstand moist, humid conditions that are ideal for mold growth.
Fiberlock IAQ 6000 is an extremely durable coating developed to withstand moist, humid conditions that provide the ideal environment for fungal growth. This easy to apply, 100% acrylic coating offers the ultimate in durability in combination with excellent mold resistance. Fiberlock IAQ 6000 contains an EPA-registered, broad-spectrum fungicide to prevent the growth of mold on the surface of the cured film. Additionally, its smooth finish minimizes dirt buildup that provides nutrients for mold growth.
IAQ 6000 is recommended for use on plaster, wallboard, sheetrock, concrete, masonry block, wood, primed metal and galvanized metal.
Fiberlock IAQ 6000 provides a clean white finish. 5 gallon pail.
IAQ 6000 is supplied ready to use, but can be thinned sparingly with water (up to 1/2 pint water per gallon) for proper application consistency if necessary. Apply IAQ 6000 generously and uniformly by brush, roller, or airless spray. Apply one coat of IAQ 6000 and ensure that the finished surface is properly sealed. To ensure that the nished surface is properly sealed, two-coats may be required on some porous surfaces.
Smooth Surfaces: 250 - 400 sq. ft. per gallon
Porous Surfaces: 150 - 300 sq. ft. per gallon
DRYING TIME @ 70°F 50% R.H
To Touch - 1 Hour
Recoat - 4 Hours
No posts found