Save 17%

Unsmoke/ProRestore Un-Flame, gal

Add to Cart for Price

Unsmoke Un-Flame™

Easy to apply flame retardant provides long-lasting protection.

A clear, odorless, water-based liquid protectant, Un-Flame renders suitable materials flameproof. Un-Flame inhibits oxidation and produces a thin layer or char which stops flame spread and further combustion and actually extinguishes the fire.

Material with Un-Flame becomes flame resistant when thoroughly dry. The more thoroughly Un-Flame is applied the greater the fire resistance. Flame resistance is established once the treated material is completely dry. Un-Flame meets NFPA-701, Steiner A.S.T.M.-E84-80 Tunnel Test and the F.A.A. Horizontal and Vertical Test.

  • Formulation: RTU
  • pH: 6.4
  • 4 gallons per case

Use Instructions

Mixing: Do not dilute. Use full strength.

Application: Apply with a pressure sprayer, cold fogger, or airless paint sprayer. Thoroughly saturate material to be treated. One gallon will cover approximately 500 square feet. See label for additional instructions.

Un-Flame protection is not removed by dry cleaning, but should be reapplied after wet cleaning to insure continued flame resistance.

For complete instructions and safety data for this product, refer to the Use Guide and Material Safety Data Sheet, available under the Documents tab.

Prorestore (Unsmoke)

Datasheet (Datasheet_Prorestore_342502000_Un-Flame_1gal_(4percase).pdf, 68 Kb) [Download]

MSDS (MSDS_Prorestore_342502000_Un-Flame_1gal_(4percase)_Jan2013.pdf, 79 Kb) [Download]

SDS (SDS_Prorestore_342502000_Un-Flame_1gal_(4percase)_May2015.pdf, 59 Kb) [Download]

Label (Label_Prorestore_342502000_Un-Flame_1gal_(4percase).pdf, 955 Kb) [Download]

No posts found

Write a review