Fire Wash is a concentrated wall wash with an ultra strength formulation for your most difficult cleaning needs. Fire Wash removes heavy smoke residues, grease, and other difficult soils from painted surfaces, metal, concrete, tile, sealed and unsealed wood, and hard floors.
- Highly concentrated for economical use
- Ammoniated formulation
- For use in fire restoration and general hard surface cleaning
- Diluted pH: 10.8
- Dilution Ratio: Up to 1:10
DIRECTIONS FOR USE:
Smoke damaged surfaces: For light degrees of smoke damage mix 11 ½ oz (339 ml) of Fire Wash into 1 gal (3.78 L) of warm to hot water (1:10 Dilution).
For heavy degrees of smoke damage: Mix 42½ oz (1.26 L) of Fire Wash into 1 gal (3.78 L L) of warm to hot water (1:2 Dilution). Dilution rates can be adjusted depending on the degree of smoke damage.
General hard surface cleaning: Mix 11 ½ oz (339 ml) of Fire Wash into 1 gal (3.78 L) of warm to hot water (1:10 Dilution). Dilution ratio can vary depending on degrees of soil build up. Mix Fire Wash in a trigger sprayer and spray onto soiled surface wiping with a sponge or a clean cloth. Rinse with fresh clean water and cloth.
No posts found