Tough solvent cuts through the heaviest grease and oil residues.
Degrease-All is tough enough to remove heavy residues, but gentle enough to be used as a traffic lane cleaner or upholstery pre-spray. A general-purpose cleaner, Degrease-All is highly effective on particulate and greasy soils, and can be used on most hard surfaces. No intoxicating fumes.
Degrease-All’s specially-formulated ammoniated solvent removes smoke residues, grease, and other difficult soils from painted surfaces, metal, concrete, tile, sealed or unsealed wood, hard floors and wet cleanable fabrics.
- Formulation: Concentrate
- pH: 12.3
- 4 gallons per case
Apply Degrease-All with a compression sprayer. Mixing: Dilute Degrease-All with 3–9 parts hot tap water and place in sprayer.
Application: Lightly spray on to soiled surfaces, agitate with sponge, rinse off if necessary, towel dry. For best results, immediately wipe off liquefied soil before Degrease-All dries.
For complete instructions and safety data for this product, refer to the User Guide and Material Safety Data Sheet, available under the Documents tab.
No posts found