Hydro-Force Viper Neutral Stone Cleaner, Neutral Prespray and Extraction Rinse for Stone Surfaces, 1 Gallon, CST03GL / 203962 / 2692-0633

CODE: CST03GL

Viper Neutral Stone Cleaner is the perfect solution for maintenance cleaning of stone and tile floors, countertops and more. It is formulated to be effective and safe on virtually all stone surfaces. It cleans up everyday messes, soiling, and spills with a gentle, yet effective neutral formula. Unlike most floor cleaning agents, Viper Neutral Stone Cleaner has no chelating agents which can alter the color by attacking the minerals and may require polishing to correct.

Viper Neutral Stone Cleaner can be used on natural stone such as marble, granite, limestone, travertine, slate, sandstone, and flagstone. It is also perfect for maintenance cleaning of ceramic and porcelain tile and grout. Whether you are cleaning a stone floor, countertop, fireplace mantle, or shower, Viper Neutral Stone Cleaner is your perfect choice.

Features

• A perfect neutral pre-spray and rinse for stone. It is also suitable for tile and grout not needing restorative cleaning.
• Contains no water conditioning or chelating agents.
• Ideal for maintenance cleaning.

Specifications

Dilute. For normal soiling, mix two ounces of solution per gallon of warm or hot water (1:64) into a professional spray applicator. For heavy soiling, mix 4 four ounces of solution per gallon of warm or hot water (1:32) into a professional spray applicator. For application through a Hydro-Force Inline Injection Sprayer, mix 1 quart of solution per gallon of water in sprayer bottle. Use normal 1 to 8 tip for application.

Prespray. Apply mixed solution with sprayer evenly and liberally across surface to be cleaned. If preferred, you can apply mixed solution with a damp mop, sponge, or other appropriate professional equipment.

Extract. For best results, extract cleaning solution using Viper Neutral Stone Cleaner with a rotary agitation surface tool such as a Hydro-Force SX-15 or Hydro-Force SX-7. On sensitive surfaces such as soft marble, make sure the floor has been thoroughly vacuumed or swept to remove pebbles, sand or other abrasive material prior to cleaning. For especially sensitive finishes, use the Hydro-Force Gekko tool with brush head instead for extraction.

Dry. Accelerate drying with air movement and be sure to eliminate puddling in grout lines (if applicable).

Protect. To protect stone surfaces from future stains and spills, consider application of Viper Prestige Water-based or Solvent-based Impregnating Sealers, if needed.