The all new HP60 Plus Injectidry Floor Drying System.
- Quieter: No hissing noise from pressure relief valves
- Easier to set up. No questions in the minds of the technician about the pressure relief valves
- Less cumbersome
- No breaker tripping unless the breaker is faulty or you have too much equipment on the circuit. Amperage will never exceed 12 amps
- Going to move more air under all setup conditions
- Going to adjust to maximum vacuum suction whether you are using 1 panel or 20
- Usable with all attachments and hoses you now have
- CUL & ETL Listed
| Comes With | Qty | SKU |
| HP60 Plus Unit | 1 | |
| Main AIR IN - Quick Connects installed at factory | 1 | PTFC |
| Main AIR OUT - Quick Connects installed at factory | 1 | PTMA |
| AIR OUT Main Hose - 6’ w/factory-set PRV | 1 | AOMH |
| AIR IN Main Hose - 6’ w/ inline filter, factory-set PRV & Main QCT | 1 | AIMH |
| Carry Bag | 1 | CB1 |
| Rolling Duffle Bag | 1 | CB2 |
| Safety Yellow Blank Hose (1½” x 25’) | 2 | PLO3 |
| Quick Connect - Panel T’s (Hosecuffs attached) | 7 | VAC-T |
| Quick Connect - 1½” Hosecuff | 14 | HC3 |
| End Cap Plug | 7 | QCEPO1 |
| Variety Panel Package: (6) Large Multi Port Panels, (1) 8 Point, (1) Large Clear, & (1) U Panel Kit which includes (1) U Panel & (3) Small Panels w/ 3/8" Port | 1 | VACITPA-VP |
| Roll of Tubing | 1 | RHO5A |
| Soft Tubing Stoppers (bag of 40) | 1 | RP2 |
| Silencer | 1 | Silencer |
| Quick Connect Inline Manifold | 6 | QCM01 |
No posts found
