Product filters

Manufacturer

Parts & Accessories

$215.00 $155.00
Sycorp, Outlet Size: 12 inches
ABATACCS
+
$250.00 $189.00
Sycorp, Outlet Size: 16 inches
ABATACCS
+
$190.00 $129.00
Sycorp, Outlet Size: 8 inches
ABATACCS
+
$185.00 $146.25
This replacement HEPA filter fits the HVE3000 Flood Pumper. This filter is designed to capture extremely fine particulates, helping to improve indoor air...
+
$250.00 $196.00
DriTec 4000i Reactivation Ducting Kit, Heat Resistant, 20ft. with collar Replacement ducting for the DriTec 4000i Dessicant Dehumidifier. Rugged...
+
$125.00 $98.00
Dri-Eaz, 1" Prefilter
Dri-Eaz Velo Replacement Pre-Filter, Pack of 20 (F520 / 111327)
+
$180.00 $139.00
Dri-Eaz, HEPA
Dri-Eaz Velo HEPA Filter Replacement, Primary Filter (F519 / 111333)
+
Contact us for a price
Phoenix/Thermastor OEM Replacement condensate clear vinyl drain hose tubing for most commercial LGR dehumidifiers. Does not include connectors or...
$28.00 $21.44
Dri-Eaz OEM female quick connector for drain hose tubing 1/4 inch barb used on dehumidifiers
+
$320.00 $247.69
Replacement Pump for Dri-Eaz 1200/2400/Evolution dehumidifiers
+
$275.00 $214.00
Replacement Pump for Dri-Eaz 2000 dehumidifier Deepwell 80gph 115v Pump with 6ft cord Part Numbers: 113493, 08-00289
+
$19.00 $13.53
Dri-Eaz OEM male quick connector for drain hose tubing used on dehumidifiers 3/8 inch barb
+
$375.00 $310.34
This is the upgrade kit for Dri-Eaz Dehumidifiers and includes Defrost Sensor Cable. For models 1200, 2000, Evolution and 2400 dehumidifiers.  If you...
+
$220.00 $161.78
Submersible condensate pump for the Dri-Eaz 7000XLi and Revolution LGR. 1.3 gpm, 115V
+
$14.00 $10.50
Dri-Eaz Hose Wrap plate for Evolution Dehumidifier (08-01481, 103786)
+
$25.00 $18.64
Outlet Grill for Dri-Eaz LGR Evolution Dehumidifier (104667, 08-01478)
+
$62.00 $45.90
Dri-Eaz Power Cord Assembly 16/3 25ft (08-00226) for Evolution and 1200 Dehumidifiers Specifications Gauge: 16/3 Length: 25ft Power...
+
$36.00 $27.99
Dri-Eaz, 1" Prefilter
Keep your dehumidifiers operating at maximum efficiency with the only filter designed specifically for restoration, remediation and construction. Protects...
+
$17.50 $13.90
Replacement Filter for Phoenix DryMAX (4036060/4036000/4038500/4038550) 9" x 11 3/8" x 3/4" MERV 10 Each (12 per box)
+
$0.88 $0.68
Dri-Eaz Green 3/8 inch (9.5 mm) Hose Clamp for use on tubing/connectors on dehumidifiers  
+
$100.00 $81.23
Dri-Eaz Replacement Power Cord 16/3 25ft (02-01614) for 7000xli, 6000Li, Revolution, PHD 200 Dehumidifiers.  Specifications Gauge: 16/3...
+
$74.00 $58.00
Dri-Eaz Power Cord Assembly 14/3 25ft (08-00203) for 2000 and 2400 Dehumidifiers.  Specifications Gauge: 14/3 Length: 25ft For Models...
+
$19.00 $13.90
Replacement Filter for Phoenix DryMAX XL (4037060 / 4037000) 12" x 14" x 3/4" MERV 10 Sold each (10 per box)
+
$20.00 $12.90
Glassfloss, 2" Prefilter
2" Filter, MERV 8, Standard Pleated Filter, 16" x 16" x 2", 4021799
+
$75.00 $58.00
Secure layflat ducting to the process air outlet of the Dri-Eaz Revolution LGR and PHD200 Dehumidifiers with the Dri-Eaz Duct Attachment Kit.  This kit...
+
$590.00 $486.00
Dri-Eaz Command Hub Control Panel Upgrade/Replacement Kit.  Allows existing Dehumidifiers to work with Dri-Eaz new Command Hub system including mobile...
+
$310.00 $254.00
This is the replacement control panel for Dri-Eaz Dehumdifiers. For models 1200, 2000, Evolution and 2400 dehumidifiers.  Does not include Defrost...
+
$80.00 $48.90
The Dehumidifier Risers are designed to elevate your Santa Fe/Ultra-Aire for enhanced condensate line drainage. Santa Fe/Ultra-Aire’s risers also...
+
$24.00 $17.90
Long-lasting standard replacement pre-filter prevents large particles and debris from entering the unit and preserves the MERV filter for small particle...
+
$42.00 $34.00
Standard MERV 13 replacement filter for select Santa Fe and Ultra-Aire dehumidifiers. Constructed of pleated materials designed to trap particles down to...
+
$240.00 $189.00
Humidity can happen anywhere–not just next to a floor drain. Gain flexibility in where you install your dehumidifier with the Therma-Stor condensate...
+
$75.00 $59.00
The Santa Fe Supply Duct allows you to set up your dehumidifier in an unfinished space or utility room while providing the benefits in a finished space. In...
+
$42.00 $32.00
The Santa Fe Supply Duct allows you to set up your dehumidifier in an unfinished space or utility room while providing the benefits in a finished space. In...
+
$180.00 $139.00
Hang kits can be used to suspend any horizontal Santa Fe/Ultra-Aire dehumidifier in a crawl space, basement or attic setting. Hanging a Santa Fe/Ultra-Aire...
+
$36.00 $28.90
Standard MERV 13 replacement filter for select Santa Fe and Ultra-Aire dehumidifiers.  Constructed of pleated materials designed to trap particles down to...
+
$165.00 $136.00
The Santa Fe Supply Duct Kit is used to duct the 2 outlet vents for dehumidifiers for use in an out-of-sight space or in multiple areas. Features...
+
$44.00 $34.50
Standard MERV 13 replacement filter for select Santa Fe and Ultra-Aire dehumidifiers.  Constructed of pleated materials designed to trap particles down to...
+
$220.00 $174.00
The Santa Fe duct kit allows you to set up your dehumidifier in an unfinished space or utility room while providing the benefits in a finished space. Duct...
+
$110.00 $82.00
This accessory is used for ducting the 2 outlet vents of the dehumidifier for use in an out-of-sight space or in multiple areas. If you wish to only duct...
+
$65.00 $47.00
Dri-Eaz, 1" Prefilter

Dri-Eaz PHD 200 Replacement Filter, Pack of 3 (116689/F527)

+
$160.00 $124.00
The Santa Fe duct kit allows you to set up your dehumidifier in an unfinished space or utility room while providing the benefits in a finished space. In an...
+
$300.00 $229.00
The Ultra-Aire 2x4 Wall Mounting Bezel Kit is designed to enable installation of the MD33 in-wall dehumidifier in a 2x4 cavity without having to cut a...
+