Dri-Eaz DriForce Rescue Mat System (119218 / F286)
119218

List price: $1,375.00
$1,079.00
+
You save: $296.00 (22%)
The Dri-Eaz Rescue Mat System is used in hardwood floor drying. It offers the most efficient way to extract water vapor from hard wood floors. With just a single hose connection to each mat, you can cover large areas with just a single recovery unit. The Rescue Mat System uses the power of a high-pressure blower like the DriForce Airmover or the HVE 3000 Flood Pumper (purchased separately) and a highly effective sealing mat system to draw moisture through the surface of the floor.
 
The Dri-Eaz Rescue Mat system draw out trapped water vapor from your hardwood floors. Not meant to be used on laminate flooring. The gasket sides of each mat create a powerful seal for the greatest possible suction. Two different mat sizes are included in this package for custom drying jobs. Each mat is made from strong PVC plastic and must be cleaned with hot water and soap after each use to avoid cross contamination between jobs. 

Features

  • Setup is fast and simple with just one hose connection per mat
  • Two panel sizes for mix-and-match versatility
  • Remove moist air if used with the HVE 3000 Flood Pumper or DriForce Airmover
  • Remove liquid water if use with an extractor 

Specifications

  • Dimensions
    • Large Mat (H x W):  46 x 30 inches  (117 x 76 cm)
    • Small Mat (H x W):  23 x 30 inches (58 x 76 cm)
  • Hose with Cuffs:  7 linear ft
  • Weight:  20 lbs (9.1 kg)
  • Gasket seal:  0.5 inch foam strip
  • Mat material:  PVC plastic
  • Part Number:  F286 / 119218

What's in the Box? 

  • 4 - 46" x 30" mats
  • 2 - 23" x 30" mats
  • 3 - 7' hoses w/ cuffs
  • 2 - Connector sleeves
  • 6 - Hose cuffs
  • 5 - T-connectors
  • 1 - Gasket roll
Brand:
Dri-Eaz

Product Spec Sheet (F286_DriForce_Rescue_Mat_System_SpecSheet.pdf, 643 Kb) [Download]

Manual (F286_F287_Rescue_Mat_Manual.pdf, 357 Kb) [Download]

No posts found

Write a review