Fiberlock LeadSafe Lead Dust Wipes are conveniently packaged towelettes presoaked in a trisodium phosphate (TSP) solution to aid in surface preparation and cleaning for the quick removal of harmful lead dust. LeadSafe Wipes are ideal for use before and after any lead abatement project and are a critical part of a conscientious program for the Interim Control of lead-based paint dust hazards. LeadSafe Wipes meet all Federal, State, HUD and EPA guidelines for cleaning and removing lead dust.
- Formulated to control and remove lead dust
- Meet all federal, state, HUD and EPA guidelines
- Faster cleanup and compliance
- Lifts lead dust out of the substrate
- Available in one re-sealable size: 90 8” x 12” towels
- Active Ingredient: Trisodium Phosphate <0.1
- Color: White Towelette
- Odour: Slight Odour
- Shelf Life: 18 Months Min. (Original Sealed Container)
- Flash Point: Non-combustible
- Package Size: 1 Tub
- Ready to use: Yes
- Product Number: 5498-90C
Remove container cover, remove and discard seal. From center of roll, pull up corner of towel, twist to a point and thread through hole in underside of cover. Replace cover tightly. Pull up towel and tear at perforation. Wipe lead dust clean away from surface.
Note: Trisodium Phosphate can degloss substrates including painted surfaces, plastics, and soft metals. Always test target material in an inconspicuous area prior to use.
LeadSafe Wipes are excellent to use on any surface where deteriorated lead-based paint dust is present, such as: walls, windows, railings, ceilings, stairs, doors, fences, trims, sills, floors blinds, gates, baseboards, porches, moldings.
LeadSafe Wipes were designed for use by: Abatement contractors, painting contractors, public health inspectors, environmental specialists, home owners, building owners and apartment renters.
No posts found