Save 21%

Chemspec Rust Remover, 1 Quart, 112150 / C-RRCS

List price: $48.00
You save: $10.10 (21%)

Chemspec Rust Remover. The professional’s choice for rust stains on carpet, upholstery, textiles, and acoustical ceiling tiles. It is ready-to-use; requires no messy mixing, thus saving you labor and time.

Specifically formulated to remove the toughest rust stains from a variety of carpets and fabrics. When used on acoustical ceiling tiles, Rust Remover will not affect the sound-deadening properties. It helps the tiles maintain their natural appearance and characteristics.

Always test for colorfastness before using. Though Rust Remover is safe on dyes, it should be neutralized with an alkaline spotter and then rinsed thoroughly.


  • Removes rust from a variety of surfaces
  • No toxic vapors
  • Safe for stain-resistant carpet
  • Ready to use


  • Coverage:  Dependent on application
  • Form:  Liquid
  • Colour:  Clear
  • Odour:  Low
  • pH:  5.5
  • Package Size:  1 Quart (0.9 L)
  • Ready to use:  Yes
  • Dilution Ratio:  RTU
  • Product Number:  112150 / C-RRCS

Product Application

1) Do not dilute.

2) Apply to spot with a clean white towel.

3) When stain disappears, rinse thoroughly with water.

4) Establish good drying conditions.

Caution: Use product only in well-ventilated area. To avoid skin irritation or slip hazards, do not walk on wet carpets with bare feet. Avoid contact with glass and ceramic surfaces.

Coverage Area:
Dependent on application
Package Size:
1 Quart (.9 L)
Ready To Use:
  • Yes

Product Spec Sheet (Chemspec_112150_Rust_Remover_PDS.pdf, 420 Kb) [Download]

SDS (Safety Data Sheet) English (Chemspec_112150_Rust_Remover_SDS_Eng.pdf, 272 Kb) [Download]

SDS (Safety Data Sheet) French (Chemspec_112150_Rust_Remover_SDS_Fre.pdf, 277 Kb) [Download]

Label (Chemspec_112150_Rust_Remover_Label.pdf, 1,899 Kb) [Download]

No posts found

Write a review