Save 18%

Unsmoke Wall Wash with Biosolv, Smoke Damage Hard Surface Cleaner, 3.8L Gallon, 114758 / C-U0141234G

List price: $52.00
You save: $9.10 (18%)

Unsmoke Wall Wash with Biosolv. When cleaning fire and smoke-damaged walls, you need extra cleaning power. Unsmoke Wall Wash with Biosolv is specially formulated to remove soot and smoke residue from walls and hard surfaces.

Highly effective wall prep, soot and grease removal. Quickly removes both oily and dry soot and no rinse is required. Especially effective for cleaning up after grease fires or to clean residue from tobacco. Can also be used for parts washing.

A truly multi-use product, Wall Wash can also be used as a powerful degreaser for parts washing and as a carpet pre-conditioner for olefin carpets, and can be added to any cleaning agent to boost cleaning effectiveness and odor control. Because this product deodorizes smoke odors, often no additional deodorizing is necessary. Walls come clean fast and are ready for painting in minutes. You save time, labor, and money.


  • Use as a wall cleaner solution or as a booster in almost any cleaning solution.
  • Has brightening and deodorizing agents
  • Effective for preparing walls for painting
  • Variable dilutions


  • Coverage:  Dependent on application
  • Form:  Liquid
  • Colour:  Light green
  • Odour:  No information
  • pH:  11.5
  • Flash point:  >201° F  (94° C)
  • Speficic gravity:  1.032
  • Package size:  3.8 L Gallons, 4 gal/case
  • Ready to use:  No
  • Dilution:  Add 4 oz to 32 oz to each gal of water
  • Xactimate:  CLNBad AV+
  • Product Number:  114758 / C-U0141234G

Product Application

As a wall cleaner:  
1. Remove excess smoke and soot using a lamb’s wool duster or HEPA filter vacuum.  
2. After testing the contamination level and surface durability, add 4 oz. and up to 32 oz. (125 to 1000 mL) to each gallon (3.8 L) of water depending on the severity of the job.  
3. Apply diluted Wall Wash with a wall cleaning machine, or spray on, and wipe down.  
4. Rinsing with water is recommended if used at higher concentrations, or if used to clean high-touch surfaces.   

As a booster:  
1. Mix 8 ounces (250 ML) of Wall Wash per gallon (3.8 L) to any ordinary cleaning solution for use on walls, floor or other hard surfaces.  
2. Rinsing with water is recommended if used at higher concentrations, or if used to clean high-touch surfaces.

Prorestore (Unsmoke)
Coverage Area:
Dependent on application
4 - 32 oz to gal of water
Package Size:
3.8L Gal
Ready To Use:
  • No
Shipping Weight
8 lbs

Product Data Sheet (C-U0141234G_PDS.pdf, 89 Kb) [Download]

SDS (Safety Data Sheet) English (C-U0141234G_SDS_Eng.pdf, 1,137 Kb) [Download]

SDS (Safety Data Sheet) French (C-U0141234G_SDS_Fre.pdf, 1,300 Kb) [Download]

Label (C-U0141234G_Label.pdf, 1,556 Kb) [Download]

No posts found

Write a review