Bridgepoint Systems Fab-Set, Acid Rinse And Neutralizer, 3.79L Gallon, CR12GL / 70266 / A70266

CODE: CR12GL

Fab-Set, Liquid Acid Neutralizer & Rinse Agent is perfect as your carpet cleaning finishing touch. Fab-Set eliminates detergent residues, speeds carpet drying and makes colors really pop. It also prevents browning, gives carpet a wonderful, soft feel and returns carpet to the perfect pH for use or protector application.

Ideal when used as a rinse in you portable or truck mount, Fab-Set can also be misted onto carpet as an after-spray. Fab-Set is also great when used with a bonnet to remove yellowing and browning or as a pre-spray on heavily foaming carpets. Anionic formula.

Used as a final rinse or mist on, Fab Set restores carpet fibers to a proper pH level. Perfect for use on nylon, wool, cotton, or other textiles that should be left at a neutral or slightly acidic state.

Features

• Neutralizes and helps in the removal of excess cleaning chemicals
• Helps prevent and remove browning on cellulosic materials
• Can be used as post cleaning treatment. Prepares the carpet for protectors
• Leaves carpet softer and refreshed
• Effective for portable and truckmounted cleaning systems
• Economical Acid rinse for the complete low residue carpet cleaning job

Specifications

• Coverage:  Dependent on application
  
• Form:  Liquid
  
• Colour:  Clear
  
• Odour:  Light apple vinegar
  
• pH:  3
• RTU pH:  2.8
• Package size:  3.79L Gallon, 4 gals per case
• Ready to use:  No
• Dilution:  4 to 6 oz per gallon of water
• Dilution ratio:  1:32 to 1:21
• Product number:   CR12GL / CR12 / 70266 / A70266

Product Application

Carpet Directions: Mix 4 to 6 ounces of Fab-Set per gallon of water (1:32 to 1:21) and apply with a standard pump or power sprayer. Apply after cleaning.

Upholstery: Mix 4 to 6 ounces of Fab-Set per gallon of water (1:32 to 1:21). Fab Set is excellent as a final rinse through extraction machines. It may be used as a final rinse through your machine or spray-misted on fabric after cleaning.

Portable Extractor: Mix 2 ounces of solution to five gallons of water in extraction tank (1 to 320).

For Truck Mount Use: Mix 1 quart of Fab-Set per 5 gallons of water (1 to 20). Meter as needed.